Outdoorstone - Resin for Stone Carpet

Outdoorstone Overview

Outdoorstone is a benchmark in stone carpet resins.

This resin will look great in any space, whether indoors or outdoors.

Ideal Application and Storage Conditions

• Ambient temperature: 15°C to 35°C
• Substrate temperature: 12°C to 25°C
• Humidity: 75% maximum
• Storage: Store in unopened packaging at an ambient temperature of between 15°C and 25°C.
• Shelf life: 6 months

Common Uses

• Outdoor areas (terraces, patios, courtyards, etc.)
• Indoor areas (entrance hall, office, etc.)

Colours Available

Outdoorstone is colourless, but there is a wide range of aggregate colours available.

Packaging

• 10 kg (5 kg resin + 5 kg hardener)
• 20 kg (10 kg resin + 10 kg hardener)
• 40 kg (20 kg resin + 20 kg hardener)

Advantages

• UV-resistant
• Customisation: Wide range of aggregate colours available and you can create any pattern you like
• Comfort: Very pleasant to the touch

Consumption

• For 25 kg of aggregate (2.5/5 mm) and 1.25 to 1.5 kg of OUTDOORSTONE: the mixture covers approximately 1.5 m² at a thickness of 1 cm.
• For 25 kg of aggregate (3 mm) and 1.25 to 1.5 kg of OUTDOORSTONE: the mixture covers approximately 2 m² at a thickness of 7 to 8 mm.

Application Advice

1. Prepare the surfaces: they must be stripped (sandblasted, planed, shot-blasted, diamond sanded). And free of dust, grease, oil, moisture, etc.
2. Optional steps: Apply POXYFIRST primer (approx. 300 g/m²). A 2nd coat may be necessary on very porous surfaces (150 to 200 g/m²). To ensure good adhesion and ease of application, the primer should be sanded with dry quartz type 0.4/0.8 (Do NOT sand over). After this step, lay the stone carpet the next day.
3. In a pot, mix half the resin and half the hardener for 2 to 3 minutes at a speed of 400 rpm until a homogeneous mixture is obtained (do not overmix to avoid the risk of exothermia).
4. Add this mixture to the Marble or Quartz, then mix until a homogeneous mixture is obtained, following the consumption proportions given above.
5. Spread the mixture over the floor and smooth with a metal trowel.
6. Leave to dry for approximately 72 hours.

Technical Data