KIT of 6 Bright Bio-Sourced Colours / for CCR Casting Resin

Product Description

Entropy Resins colourants are formulated from 98% biobased materials. This vivid colour kit lets you add colour to your various projects, for art, moulding, jewellery, coatings, woodworking and more.

Shades Included

• Eclipse (Translucent Black)
• Whitecaps (Opaque White)
• Flamingo (Translucent Pink)
• Island Sunset (Translucent Orange)
• Sea Swell (Translucent Blue)
• Alluring Orchid (Translucent Violet)

Advantages

• These colourants are environmentally friendly and offer long-lasting performance.
• The colourants are highly concentrated.
• They are equally well suited to deep pours and thin coats.
• They mix easily, without lumps.
• They can be used to create both translucent and opaque shades.
• Translucent colours don't clump.

Good to Know

• Colourants are compatible with most other epoxy resins on the market.
• For applications under 3mm, CLR epoxy resin is ideal, and for castings prefer CCR epoxy.

Instructions for Use

1. Pour the resin and hardener into a mixing container according to the ratio indicated on the back of the hardener.
2. Mix the epoxy with a stirring stick for about 1 minute.
3. Shake the bottle before opening. Add the colourant to the epoxy, gradually adding small quantities to achieve the desired shade. We recommend a maximum charge of 5% by weight or volume.
4. Stir again for 1 minute until the colour is homogeneous.
5. Pour the epoxy onto your project and allow to cure!

How to Darken or Lighten Colours?

• Darken colours: To soften or darken a colour that's too bright, add a drop of Eclipse colour. Usually one drop is enough, but we recommend adding them one at a time to avoid exceeding the desired hue.
• Lighten colours: if the colour is very intense, add colourless epoxy resin.
• Pastel colours: for pastel colours, mix Whitecaps with other colours.

Further Information

For further information, please consult the product data sheet.