Bio-Based Resin ONE: Stratification

Product Description

ONE epoxy resin from Entropy Resins is designed for general laminating, bonding and coating applications. This resin is USDA BioPreferred® certified, with a 30% biobase content. It's the ideal choice for fiber-reinforced composites thanks to its low viscosity and excellent debubbling properties.

Choice of Hardeners

• ONS (Slow): Working time 43 minutes at 25°C.
• ONF (Fast): 43-minute working time at 25°C. Ideal for applications requiring rapid polymerization.

Application Areas

Wood, general laminating work, coating, bonding, manual overlay etc.

Key Benefits

• Versatility: Suitable for a wide range of applications.
• Low viscosity and debubbling: Bubble-free, smooth results. Uniform application.
• Environmentally-friendly: Developed with Super Sap technology from renewable raw materials derived from co-products or waste from other industrial processes, Entropy Resins' ONE epoxy resin contains 30% biobased components, and is certified by the USDA Certified BioBased Product label.

Technical Data

Mixing Ratio

• By volume:
  • 2:1
  • 2:1
• By weight:
  • 100:43
  • 100:43
• Mixture viscosity (cPs at 25°C):
  • 1020
  • 1060
• Pot life (at 25°C):
  • 18 minutes
  • 43 minutes
• Dry to the touch (at 25°C):
  • 3 hours
  • 8 hours
• Full polymerization recommended:
  • 7 days at 25°C
  • 7 days at 25°C (post-curing recommended)

Consumption

6L kit = 32.5m². Consumption is reduced by 50% on porous substrates or fiber reinforcement.

Application Advice

• For best results, mix the two components according to the weights indicated.
• Mix the product for at least two minutes, scraping all surfaces of the container to ensure complete mixing.
• Use products in a controlled environment; avoid high humidity and low temperatures.
• For good adhesion, epoxy bonding surfaces must be clean, dry and sanded.
• If you're unfamiliar with the product, create small test samples before starting a larger-scale project.

Good to Know

An amine film may appear during polymerization, giving a sticky, oily or waxy appearance to the surface. It can also reduce adhesion and hinder sanding. To remove it, you can use WEST SYSTEM's cleaner.

For further information, please consult the technical data sheets.