AQUAFINISH: Matt Polyurethane Varnish 3.6KG

Product Description

L'AQUAFINISH is a matte, polyurethane, two-component varnish designed for finishing concrete floors, stoneware, terrazzo, and all types of mineral surfaces. Usable indoors and outdoors.

It can also be used as a topcoat on epoxy-cement systems and self-levelling products based on epoxy and polyurethane.

Main Uses

• Ideal for exhibition halls
• Homes
• Offices

Product Details

• Colour: Translucent matte
• Packaging: 3.6 kg

Key Benefits

• Wear and chemical agent resistant
• Compatible with various surfaces
• Ensures a durable and aesthetic finish
• Adheres to low porosity substrates

Consumption

0.065 to 0.085 kg / m² per coat.

Mixing Preparation and Application

1. Ensure that surfaces are clean, dry, and free from dust, oil, or grease.
2. Depending on climatic conditions, add 0 to 10% water, then mix at low speed with a stirrer.
3. Without stopping the stirrer, add the hardener and mix to obtain a homogeneous mixture.

Depending on the temperature, wait at least 90 minutes and a maximum of 8 hours between coats. Apply on the same day; otherwise, sand with a 120 grit.

Application Conditions and Storage

Additional Information

Mattifying bi-component varnish for waxed concrete, coloured resins...

• Packaging: 2.75kg
• Colour: translucent matte

Two-component polyurethane water-based varnish used for the finishing of concrete floors, terrazzo, and all types of interior or exterior mineral surfaces. Used as a topcoat on epoxy cement systems, self-levelling based on epoxy or polyurethane.

Good chemical resistance, in the sun, atmospheric agents, abrasion.

Very good adhesion to low porosity substrates.

Preparation of the Mixture

Pour 0 to 10% of water into the resin (component A) according to the climatic conditions. Mix with an agitator at low speed, then add the hardener (component B) without stopping the stirring until a homogeneous mixture is achieved while avoiding the incorporation of air during stirring.

For the second layer, wait a minimum of 90 minutes and a maximum of 8 hours (depending on temperature). It is best to apply the layers the same day; otherwise, it will be necessary to sand with a 120 grit.

Consumption

0.065 to 0.085 kg / m² per coat.