5KG Epoxy Wall Protection Paint

Product Description

Bi-component epoxy paint for wall protection. Waterproof paint, applies on our primer PREPOX.

Waterproof paint, cleans with water.

Packaging

• 5kg

Colour

Please allow a manufacturing delay of 1 week. To choose your colour, please refer to a RAL.

Main Uses

• Laboratory walls
• Milking parlour painting
• Dairy walls
• Any parts to be washed with water

Consumption

The application of 2 roller coats at a temperature of 20°C, with a 16-hour interval between each coat, requires 0.400 kg/m² per coat.

Preparation of the Substrates

Applies mainly on vertical substrates: plasterboard, agglo, wood….

The substrates must be dry, free of dust, grease, oil, moisture, curing compound, friable or non-adherent parts and they must not undergo capillary rise of moisture. The stripping is done by mechanical action (sanding, planing, shot blasting, diamond sanding).

The use of our PREPOX solvent-free epoxy primer is recommended for very porous substrates. For steel and aluminium, the preparation of the substrate is done by sandblasting to a minimum care degree of SA 2.5.

Mix Preparation

The components (Comp.A resin + Comp.B hardener) are delivered pre-dosed. They should be mixed for 2.5 to 3 minutes at a speed of 400 rpm with an electric stirrer equipped with a helical blade (not right) with a diameter about 2.5 times smaller than the diameter of the bucket.