10 Cm Wide Polyester Tearing Fabrics

Product Description

The peel ply fabric allows you to remove the amine-contaminated resin layer. When you resume your work, simply peel the fabric instead of sanding it again and pick up where you left off. By tearing off the peel ply, you remove the polluting solvents.

Specifications

• 85g/m² heat-set polyester peel ply fabric (softer than nylon peel ply fabric)
• Red tracer as a visible indicator to reduce the possibility of leaving a layer of peel
• Leaves a finish that can facilitate sanding
• Maximum operating temperature: 180°C

Recommendations

We do not recommend the use of this product with phenolic resins.

It is recommended to store the peel ply fabrics in a cool and dry environment. The recommended storage temperature is between 10 and 30°C and relative humidity between 50 and 75%. The peel ply should remain in the packaging until it is used.