10 8mm Self-Drilling Anchors - Raumer

10 8mm self-drilling anchors - RAUMER

Pack of 10 self-drilling anchors 8 mm.

Caving use.

Installation with a hand-held hammer.

Using a drill is of course possible, but it is essential to finish drilling the hole with the self-drilling anchor itself, in order to achieve a flat hole bottom that provides a good seat for the cone.

Sold in packs of 10 pieces (10 bodies + 10 cones).

TECHNICAL SPECIFICATIONS:

Material: cemented and galvanised CrNi steel.

Sophisticated design that guarantees perfect anchoring to the rock.


Warning: before using the TAP self-drilling anchor 8 mm Raumer, always read the technical data sheet as well as the general information.

Warning: always use the body of the TAP self-drilling anchor 8 mm with the cone provided by Raumer Srl.

Using it with other types of cones, which may have inappropriate dimensions, can compromise the anchoring of the anchor.

Raumer Srl and Expé disclaim any responsibility for the use of the TAP anchor, particularly in the case of incorrect installation.



Resistance:

• Extraction: 31 KN.
• Shear: 25 KN.
• Warning: resistance values may change significantly depending on the type of rock and incorrect fixing.
• Weight: 21 g (body + cone).