Metallic multi-colour Plasti Dip aerosol paint finish 400ml

Plasti Dip anthracite metallic spray paint finish 400ml, which presents itself as an ultra-durable liquid elastomer coating that adheres to all surfaces, providing grip. This finish is resistant to scratches, light impacts, abrasions, weather conditions, electric arcs, and even the Karcher.

The spray paint finish dries in 30 minutes in open air and can be easily removed without damaging the underlying paint.



Application :

Plasti Dip is used to protect, seal, identify, insulate, cover, decorate acoustically and electrically, and waterproof... in a variety of sectors such as aerospace, automotive, watchmaking, etc.



Instructions for use :

Shake vigorously for at least 1 minute once the ball starts to move
Spray the surface to be treated in a back-and-forth motion at a distance of 20 to 30 cm
Wait at least 30 minutes between each coat
Apply as many coats as necessary (a minimum of 3 coats is recommended)
Wait at least 4 hours for complete drying


Usage tips :

Optionally mask the areas to be protected
Use the aerosol in dry weather, sheltered from the wind, in a well-ventilated area
Store the aerosol in a dry place
Only use the aerosol for its intended purpose

• Colour: multi-colour
• Finish: metallic

spray
Capacity: 400 ml
Tensile strength (according to ASTM D-638 2 6 daN/m²): excellent
Elongation (according to ASTM D-638): 430%
Cut resistance (according to ASTM D-1044): excellent
Stone abrasion: excellent
Chemical resistance to acids, alkaline products, seawater, chlorine-based solutions, or caustic ammonia: excellent
Chemical resistance to petroleum solvents and acetone: low
Insulating properties according to ASTM D-149: 1200 V/mm
Operating temperature: from -34°C to +93°C
Shore A hardness (according to ASTM D-2240): 70
Viscosity at 25°: from 80 to 100 Krebs Units
Salt fog resistance (according to ASTM B-117): over 1000 hours
Weather resistance (according to ASTM G-53): 7 to 10 years
Dust permeability (according to ASTM E-96): 0.03 grains/square foot/hour
Coverage: 3m2
Opacity (tested with black): Achieved with 4 coats
Slip resistance: excellent


Use Plasti Dip products with caution. Before use, read the label and product information.