Petzl Traxion Pro Pulley Block

PRO TRAXION 2 PETZL BLOCKING PULLEY

Designed for easily setting up heavy load lifting systems, the blocking pulley PRO TRAXION PETZL features a large diameter sheave mounted on a sealed ball bearing providing excellent efficiency.

To facilitate rope handling, it can be installed while the PRO TRAXION PETZL is fixed to its anchor point.

The integrated swivel allows the PRO TRAXION to orient under load in the correct axis and to connect directly to a connector, a rope, or a strap.

Its triple-action opening is easily operable with gloves.

A highly visible red indicator allows for checking the proper locking of the mobile flange.

The pin trigger benefits from a drainage slot that helps optimize its operation in difficult environments: Mud, ice...

The Pro Traxion can easily be switched to Single Pulley mode by locking the trigger in the raised position.

An auxiliary attachment point allows for the creation of a moulinette.

A hole in the trigger allows for attaching a "remote control" cord.

This product has been manufactured in accordance with the requirements of Regulation CE 2016/425 for PPE (category 3) following the standards: CE EN 567, CE EN 12278, CE EN 12841 type B, UKCA, NFPA 2500 Technical Use Pulley and Rope grab

Features:

• Can be opened when fixed to the anchor
• Swivel allowing the pulley to orient under load
• Efficiency: 95 %
• Max rope diameter: 13 mm
• Weight: 295 g

Technical information:

Package contents

1 PRO TRAXION 2 PETZL blocking pulley