The improved deformable adhesive mortar PAREXLANKO 5074 Prolicrème ready to mix to allow you to carry out tile bonding on indoor and outdoor surfaces. This improved deformable adhesive mortar is suitable for all types of underfloor heating. In addition, this product has two mixing rates allowing you to achieve a normal or fluid consistency, particularly for the simple bonding of large tiles. Featuring a new formulation technology based on expanded glass microspheres, it provides a creamy texture. This composition, which consists of beads, will help lighten your mortar. Furthermore, you will also be able to mix, spread, and increase the productivity of your site thanks to the adhesive mortar.
- Extremely fine creamy texture
- Suitable for deformable surfaces: for all floors (electric or low-temperature water underfloor heating), large tiles, and facades.
- Adhesive mortar duo: double mixing rate for a normal or fluid consistency
- Productivity comparable to a 25 kg bag
- Presentation: grey and white powder
- Apparent density of the powder: 0.8 ± 0.1
- pH: 12 ± 1
- Composition: hydraulic and organic binders
- mineral fillers and lightweight additives
- Open time: approximately 30 minutes
- Adjustability time: approximately 30 minutes
- Pot life: approximately 2 hours
- Time to set: 24 to 48 hours
- Initial adhesion at 28 days (MPa): ≥ 1
- Adhesion after water action (MPa): ≥ 1
- Adhesion after freeze/thaw cycles (MPa): ≥ 1
- Adhesion after heat action (MPa): ≥ 1 • Deformability (mm): ≥ 2.5
- Weight: 4 kg
An improved deformable adhesive mortar PAREXLANKO 5074 Prolicrème - Grey - 4 kg - L5074GRIS04 Delivered in its original packaging
