Ultracut Treatment - PadXpress Auto - 125mm - For deep scratches

TheUltracut - PadXpress Auto - 125mm - For deep scratches is an ideal product for keeping a well-maintained bodywork. This product eliminates deep scratches and access defects. Its formula effortlessly removes the sharp edges of the scratch and polishes them until they are erased. It is intended for domestic or professional use and is very easy to use. The treatment comes in the form of a foam with an integrated product reservoir that attaches to all polishing machine plates using its Pad.

This product should be used with caution; always read the label and instructions carefully before using the product. Do not allow the product to come into contact with skin, clothing, eyes, or mouth; keep out of reach of children.

• The surface must be clean and dry
• Use the supplied plate to attach the applicator foam to your drill or polisher

1. Shake well before use
2. Position the applicator foam on your polisher and select a maximum working speed of 1500 rpm
3. Place the foam on the area to be treated
4. Make a quick wrist motion to apply vertical pressure on the foam and release product from the reservoir
5. Work with slow and steady movements while maintaining light pressure on the foam for good contact with the surface, but without forcing. Regularly wipe the treated surface with a microfiber cloth
6. Repeat the operation as many times as necessary depending on the surface to be treated

• Ready-to-use product, easy to use
• Eliminates scratches without sanding or varnishing
• Abrasive-free
• Brings shine and luster to the paint
• Made in France

• Pad diameter: 125 mm
• Bodywork treatment valid for 1 car
• Store in a dry place (maximum 25°C)
• Use within 12 months after opening
• To be used with a rotary polisher (incompatible with orbital polishers)
• Adapter plate for polisher: not supplied
• Weight: 230 g
• Ref. PC800

An Ultracut - PadXpress Auto - 125mm - For deep scratches treatment
Delivered in its original packaging