Anti-hologram - PadXpress Auto - 125mm

This anti-hologram - PadXpress Auto - 125mm treatment will be useful if you have circular micro-scratches to remove from your bodywork. This product erases paint defects and polishes at the same time, restoring shine and brilliance. Its very simple-to-use device allows it to be applied by a professional or an individual: it is a foam with an integrated reservoir and a Pad that attaches to your polisher.

This product should be used with caution; always read the label and instructions carefully before using the product. Do not allow the product to come into contact with skin, clothing, eyes, or mouth; keep out of reach of children.

• The surface must be clean and dry
• Check that the plate of your polisher is 125mm in diameter

1. Shake well before use
2. Position the applicator foam on the area to be treated
3. Make a quick wrist movement to apply vertical pressure on the foam and release product from the reservoir
4. Work with regular cross movements (left to right and top to bottom). For your car, select a speed of initially 1500 rpm while maintaining slight pressure on the foam for good contact with the surface but without forcing
5. Work in areas of about 1m². Once this area is treated, use your microfibre cloth to wipe off the excess on the bodywork. Repeat the operation as many times as necessary

• Erases holograms (circular micro-scratches)
• Brings shine and brilliance to the paint: high-finish polishing
• 4 times faster than a traditional method
• Easy to use with no splatter
• Made in France

• Pad diameter: 125 mm
• Bodywork treatment valid for 2 cars
• Store in a dry place (maximum 25°C)
• Use within 12 months after opening
• To be used with a rotary polisher (incompatible with orbital polishers)
• Adapter plate for polisher: not provided
• Weight: 230 g
• Ref. PC540

An anti-hologram - PadXpress Auto - 125mm
Delivered in its original packaging