Europump 12 Autoclave Pump - 4 Valves - Osculati

EUROPUMP12 4 VALVES 12V PRESSURE PUMP - Performance and Reliability

The Europump12 pressure pump with 4 valves is designed to provide optimal performance and exceptional reliability for all your water needs on board.

With a flow rate of 12.5 litres per minute and an operating pressure of 2.45 bars, this pump guarantees a constant and uninterrupted water supply.

Its permanent magnet motor and automatic lubrication shaft ensure a long lifespan and vibration-free operation, making it very quiet.

Additionally, the 4-valve system prevents the characteristic pulsations of other pressure pumps, even with a partially open tap.

The pump is equipped with 4 fittings (2 threaded 1/2" and 2 of 14mm with a 1/2" end) and a suction filter, all easily connectable.

Thanks to its internal by-pass, the pump is protected against excessive inlet pressure, and it can run dry without damage, offering great flexibility of use.

Specifications of EUROPUMP12 4 VALVES 12V PRESSURE PUMP

• Flow rate of 12.5 litres per minute
• Operating pressure of 2.45 bars
• Quiet and vibration-free operation
• Can run dry without damage
• Equipped with 4 fittings and a suction filter

Technical Information:

Package Contents

The Europump12 pressure pump is delivered with 4 fittings (2 threaded 1/2" and 2 of 14mm with a 1/2" end) and a suction filter.

Important Information

Never install the autoclave as shown in the following image, that is, on a vertical partition, with the motor facing down

This position could burn out the motor in a very short time due to possible leaks in the O-rings of the drive shaft.