Gas Cooking Plan 1 Burner - Crystal - Navy Load

Navy Load Crystal Gas Hob 1 Burner - CAN

The Navy Load Crystal from CAN is a 1 burner gas stove designed to be built-in with a black tempered glass cooking surface, suitable for the layout of vans, campervans, motorhomes, and boats.

With thermocouple safety, approved to CE standards.

This 1 burner stove with a distinctly modern design will create a hot spot (kitchen area) in your van or boat.

High-quality manufacturing equipment, this CAN stove features a beautifully designed tempered glass surface.

CAN is a European specialist, based in Italy, in cooking surface solutions for mobile applications.

As this stove has only one burner, it offers very compact dimensions and can therefore be easily installed in the kitchen!

Is the stove approved for installation inside my van or boat?

This equipment is specifically manufactured for the layout of vans, campervans, boats, and motorhomes.

Equipped with thermocouple safety features and burner caps fixed to the two burners, it complies with European gas standards for installation indoors.

With its CE certification, it is suitable for VASP approval.

Please note that if you wish to install the unit in a boat, the pot holder (not visible in the photo) is included in the cooking surface, and you will need to order the CAN pot holder separately.

How is the stove installed on the worktop?

The installation on the worktop is done by embedding it; you need to prepare a hole of 305 x 270 mm, and then the fixing is done by gluing with sealant.

For installation, allow a minimum of 55 mm between the wall opposite the stove and 100 mm on the side to avoid burning the walls and to easily place your utensils.

What should be considered for the gas connection of the stove?

For gas supply, this stove is CE approved for butane (28 - 30 mBar), GPL (30 mBar), and propane (30 - 37 mBar), and is therefore also suitable if, like many, you have CAMPINGAZ gas bottles (R901, R904, or R907).

Under the cooking surface, there is a gas inlet connection RST 8 mm, which means a reinforced stainless steel pipe with a diameter of 8 mm (outer) designed to receive an RSV 8 mm connection.

An RSV connection is a double cone connection whose sealing is achieved via an olive by compressing the pipe and the olive.

As the gas inlet pipe of the stove is reinforced, there is no need to add a crush-resistant sleeve.

Technical Specifications