Teak Cleaner - T18 Teak Step 2 - Nautic Clean

Teak Cleaner - T18 Teak Step 2 - Nautic Clean

Formulated and tested in our laboratories specifically to revive teak and restore its beautiful original appearance.

TEAK STEP 2 bleach is an acid-based product that does not attack wood, joints, or stainless steel.

The ideal is to use it in combination with TEAK STEP 1. The result is extraordinary; TEAK STEP 2 is the perfect bleach for teak.

Advantages:

• Perfect bleach.

• Perfect restoration of teak in combination with TEAK STEP 1 Cleaner Stain Remover.

• Does not alter joints (tested in the laboratory).

• Does not alter stainless steel (tested in the laboratory).

• No rinsing between the two phases, saving time.

• No hydrochloric acid

The product in video

Usage tips:

Apply pure or diluted to 50% with water depending on the condition of the teak.

After applying TEAK STEP 1, without rinsing, put TEAK STEP 2 in a bucket and using a clean deck brush, gently spread it along the grain.

You will notice the reaction; your teak will lighten as you spread it, restoring its beautiful original appearance.

Leave to act for 5 to 10 minutes, then rinse thoroughly with water while scrubbing with a soft brush to avoid damaging the teak fibres.

Attention:

Do not allow TEAK STEP 2 to dry on the teak.

We recommend wearing protective clothing: gloves, boots, overalls, goggles.

Technical specifications:

Physical state: colourless liquid pH: 0.5 - Density: 1.13

Environmental biodegradability: The detergent substances contained in the product comply with the legislation on the environmental performance of

detergents and surfactants and are biodegradable. Complies with EC regulation no. 648/2004.

Storage: keep the container tightly closed, away from cold and heat in a ventilated place.

Components: < 5% non-ionic surfactants.