Product Description
Made of stainless steel, equipped with a nylon pulley. Designed to ensure complete reliability. The drum is enclosed and protected to prevent the rope from getting stuck or tangled during opening and closing operations. It is made of stainless steel bearings to ensure perfect functioning even when the halyard is under maximum tension.
Specifications
- Height: 50 mm
- Rope Diameter: 3.5 mm
- Maximum Rope Diameter: 3 mm
- Recommended Sail Length: Approximately 3 m (between the luff point and the clew point)
Installation Options
Its height of only 50 mm allows for a very low installation of the jib, just above the deck, to maximize sail efficiency. It can also be installed below deck using an additional stainless steel extension tube.
Functionality
The furler can wind up to 3.5 mm rope with a diameter of 3 mm, allowing for the use of sails with a lower edge length (between the luff point and the clew point) of approximately 3 m. This length decreases for ropes with a larger diameter.
