The Marine Glow First Single-Component Primer is a high-quality, multi-purpose anticorrosion primer designed for marine applications. Manufactured by JET BLACK in France, this primer is formulated to provide excellent adhesion and strong obscuring power on various substrates, ensuring long-lasting protection and a flawless finish for your boat.
Key Features:
- High Quality: Crafted in France using acrylic resins and selected pigments, ensuring superior performance.
- Easy Application: Dries quickly and does not run, facilitating a smooth application process.
- Durable: Offers excellent adhesion and good opacity, enhancing the longevity of the finish.
- Compatibility: Specifically designed as a bonding primer for Jetblack single-component Marine Glow paints, achieving optimal results.
- Compliance: Meets current European standards for marine coatings.
Technical Specifications:
- Volume: 750 ml
- Coverage: 10 m²/L
- Dilution: 10 to 15% water
- Drying Time:
- Touch Dry: 1 hour
- Between Coats: 4 hours
- Fully Cured: 24 hours
- Color: White
- Application Conditions:
- Suitable for use above the waterline
- Compatible with wood, metal, or polyester surfaces exposed to marine conditions
- Application methods include brush, roller, airless, or pneumatic spray gun
- Application temperature range: 10°C to 30°C
- Theoretical Coverage: 8 to 9 m²/L
- Number of Coats: 2 to 5 with a brush, depending on the nature of the substrate
- Sanding and Recoating:
- Minimum time before sanding: 24 hours
- Maximum time before sanding: 48 hours
Materials
Acrylic resins and selected pigments
Compatibility Information:
- Substrates: Compatible with wood, metal, or polyester surfaces exposed to marine conditions
- Topcoat Compatibility: Specifically designed for use with Jetblack single-component Marine Glow paints
Application Instructions:
- Surface Preparation:
- Wood: Degrease thoroughly with an appropriate solvent. Sand the surface with P180-240 grit sandpaper. Dust off thoroughly. Apply 2 coats of the primer for submerged areas.
- Metal: Degrease thoroughly with an appropriate solvent. Strip to white using abrasive blasting to Sa ½ standard. If this is not possible, grind with P24/P36 grade to achieve a uniform appearance and a roughness of 50 to 75 microns. Apply 2 to 3 coats of the primer for emerged areas as soon as possible (within 4 hours).
- Application: Apply the primer using a brush, roller, airless, or pneumatic spray gun. Dilute with 10 to 15% water, depending on the equipment used.
- Drying Times:
- Touch Dry: 1 hour
- Between Coats: 4 hours
- Fully Cured: 24 hours
- Recoating: Sanding is recommended before applying the topcoat. Ensure a minimum of 24 hours and a maximum of 48 hours between sanding and recoating.
