Marine Gloss - Jet Black is a high-quality marine paint designed to provide a durable and glossy finish for boats. Manufactured by Jet Black in France, this product is tailored for wood, metal, or plastic surfaces exposed to salt or fresh water.
- Durability: Resistant to salt and fresh water, UV rays, impacts, and scratches.
- Finish: Provides a glossy, intense, and durable appearance.
- Application: Easy to apply with a brush, roller, or spray gun.
- Color Options: Available in Jet Black, with other colors such as white, grey-white, grey, and navy blue.
- Sizes: Offered in 0.25 L, 0.75 L, and 2.5 L containers.
- Origin: Made in France.
Technical Specifications
- Type of Paint: Marine Gloss
- Brand: Jet Black
- Color: Jet Black
- Available Sizes: 0.25 L, 0.75 L, 2.5 L
- Coverage: 10 to 12 m²/L
- Application Temperature: Between 8°C and 30°C
- Drying Time:
- Tack-Free: Approximately 90 minutes
- Re-coatable: 4 to 5 hours minimum at 20°C and 60% relative humidity; maximum re-coat window is 48 hours
- Number of Coats: A minimum of two coats are recommended, allowing 24 hours of drying time between each coat
Compatibility Information
Marine Gloss - Jet Black is suitable for application on wood, metal, or plastic surfaces exposed to salt or fresh water. For optimal results, it is recommended to prepare the surface with a suitable primer, such as the Marine Gloss primer.
Application Instructions
- Surface Preparation:
- Clean with a suitable detergent, rinse with fresh water, and let dry.
- Sand with abrasive grade 280/320.
- Apply two finishing coats.
- New Surfaces:
- Remove all old coatings.
- Apply a suitable primer for the substrates.
- Apply two finishing coats.
- Previously Painted Surfaces:
- Lightly sand with abrasive grade 80/180, followed by sanding with abrasive grade 220.
- Dust thoroughly.
- Apply one to two very diluted coats (about 50%), then two normally diluted coats until the desired final appearance is achieved.
- Thinning: If necessary, thin with Jet Black gloss thinner. Thinning should be between 5% and 20%, depending on the application equipment.
