The Hard Matrix Antifouling with Teflon - Pro Shield is a high-performance antifouling paint designed to protect your boat's hull from marine fouling. Manufactured in France by JET BLACK, this product combines advanced technology with premium materials to deliver superior protection and performance.
- Hard Matrix Formula: Creates a durable and resistant protective layer that does not dissolve in water, ensuring long-lasting protection.
- Teflon Integration: Incorporates Teflon to reduce friction, enhancing the boat's glide and overall speed.
- Double Biocide and High Copper Content: Offers effective defense against algae, barnacles, crustaceans, and other marine organisms that can attach to the hull and cause damage.
- Compatibility: Suitable for all types of boats, including motor and sail, and compatible with various substrates such as wood, steel, and polyester. Note: Not compatible with aluminum hulls.
- Ease of Application: Designed for straightforward application with a coverage rate of 8-10 m² per liter.
- Color Options: Available in black, sky blue, navy blue, and grey to match your boat's aesthetic.
Technical Specifications
- Type: Hard matrix antifouling
- Components: Teflon, double biocide, copper
- Yield: 8-10 m² per liter
- Available Colors: Black, white, red, blue
- Volume Options: 750 ml or 2.5 L
Materials
The Pro Shield antifouling is formulated with a combination of Teflon, double biocide agents, and copper to provide robust protection against marine fouling.
Dimensions
- 750 ml Can: Approximately 12 cm (height) x 10 cm (diameter)
- 2.5 L Can: Approximately 20 cm (height) x 15 cm (diameter)
Compatibility Information
- Suitable Substrates: Wood, steel, polyester
- Not Suitable For: Aluminum hulls
Application Instructions
- Surface Preparation: Ensure the hull is clean and dry. For previously coated surfaces, remove any loose or peeling paint.
- Application Method: Apply using a brush, roller, or spray gun.
- Thinning: If necessary, thin with a special antifouling thinner, up to 15%, depending on the material.
- Application Temperature: Between 10°C and 30°C.
- Coverage: Approximately 8-10 m² per liter.
- Coats: Apply two coats for optimal protection. In sensitive areas (e.g., waterline, rudder), consider adding a third coat.
- Drying Time: Allow a minimum of 6 hours before launching. For superior results, a 24-hour drying period is recommended.
