Erodable Antifouling Matrix Boatguard 100 - International

Antifouling semi-erasable Boatguard 100

Boatguard 100 is an effective antifouling against marine organisms, greasy film, and plant and animal fouling.

Semi-erasable antifouling intended for leisure boaters and professionals, applicable on vessels operating in fresh and saltwater.

Provides protection for up to one year.

• Semi-erasability ensures consistent performance during boat movement
• Quick and easy to use, practical to apply
• Can be applied up to 6 months in advance

Features:

• Appearance: Matt

• Ideal for seawater, fresh water, and brackish water

• Supports: Epoxy composite, Polyester, Lead, steel, wood

• Coverage: 9 m² per litre

• Number of coats: 2 to 3 coats (brush/roller)

• Diluent No.3 compatible with Boatguard 100

Preparation

SURFACE ALREADY COATED WITH ANTI-FOULING PAINT

In good condition:

Any dirt or surface contamination must be carefully removed, as well as the inert layer.

Perform a high-pressure wash with fresh water (3000 psi/207 bar) and/or scraping and wet sanding using abrasive paper grade P80-120.

Do not sand dry.

If the old antifouling is incompatible or unknown, isolate it with International Primocon.

In poor condition:

Remove all traces of old antifouling using Interstrip.

PRIMER: Surface preparation of bare substrates is indicated on the technical data sheets of the relevant primers.

BARE POLYESTER: Apply Gelshield 200 as a primer for protection against osmosis, or Primocon

STEEL/CAST IRON/LEAD/WOOD: Use Interprotect or Primocon as a primer coat.

Advice

Mixing:

Before use, carefully mix the product until a homogeneous consistency is obtained.

Dilution:

Dilution is not recommended.

The performance of the antifouling may be compromised if the required dry thickness is not applied.

Cleaner:

YTA085 Diluent for International Antifouling No.3.

Airless application (professionals only): Pressure: 176-220 bar/2500-3200 psi. Nozzle size: 517-521.

Control of ventilation and humidity:

Ensure good ventilation during application.

Other:

Never burn or sand dry an antifouling.

Always perform wet sanding.

The final colour will be obtained after immersion.

Hazardous product, observe safety precautions.

Use biocidal products with caution.

Before use, read the label and product information.