Picture of Öllack - 500ml - gebrauchsfertig - Le tonkinois Picture of Öllack - 500ml - gebrauchsfertig - Le tonkinois Picture of Öllack - 500ml - gebrauchsfertig - Le tonkinois

Öllack - 500ml - gebrauchsfertig - Le tonkinois

Manufacturer: Hermann Sachse
Be the first to review this product
Manufacturer part number: LT1002
GTIN: 3272910100508
Vendor: Hermann Sachse GmbH
€22.87
i h

Product Description

Le Tonkinois VERNIS / Oil Varnish is a ready to use, layer-forming varnish that provides special protection for any wood outdoors and indoors. It brings out the wood grain clearly while preserving the natural and warm character of the wood. The surface gets a special gloss with penetrating effect.

Features

  • Impact-proof and non-abrasive
  • Resistant to UV rays and light
  • Suitable for many woods in the maritime sector that are not permanently under water

Applications

  • Mouldings
  • Handrails
  • Masts
  • Decks
  • Many more

Application Instructions

Apply 4 to 8 coatings outdoors and 2 indoors.

Products specifications
Detailed SpecificationsMade of Binding agents based on linseed oil, tung oil and natural resins.
Other InformationUsage: 30-50 ml / m2 or 20 m2 / litre per coating depending on the condition of the surface and its absorptive capacity, based on smooth and planed/sanded surfaces. Absorbent surfaces may result in higher consumption rates for the first coating. Storage: Store tightly closed in a dry, cool, but frost-free place. Shelf life: Can be stored for at least 5 years in unopened original containers. Product disposal: Dispose of product residues and packaging in accordance with the local regulatory requirements. Only recycle empty cans. Constituent substances: Binding agents based on linseed oil, tung oil and natural resins. Safety warning: Rags soaked with oil can self-ignite! After applying the varnish, ensure that you rinse the rag with water and spread it out on a fireproof surface to dry (wash the brush / roller). Oil-soaked rags should neither be crumpled and left lying around nor simply thrown into the dustbin.
ApplicationSurface: Untreated wood, wood-based materials, also on cork to a limited extent. Carefully sand the rough wooden surface. The wood surface must be free of dust and grease, clean, dry and frost-free (max. 15 % wood moisture). It is recommended to prime untreated wood with Le Tonkinois Huiles Bio Impression. The priming oil penetrates deeper and provides good adhesion for the Vernis. Coatings: should always be applied thinly with a roller, brush or paintbrush. For best results, apply only one coating daily. For spraying, dilute with Le Tonkinois Thinner up to a maximum of 5%-10%. For basic sanding, 180 grit is optimal. For intermediate sanding, please use water sandpaper and 240 or 280 grit. Sanding is necessary for purposes of making the straightened wood fibres smooth and avoiding separating layers. Do not apply at temperatures below 12 °C. Drying time: 6 - 8 hours at 20°C and medium humidity; if possible, wait 24 hours before recoating. Low temperatures, high humidity and low air circulation may delay drying and aid odour formation. Ensure good aeration when applying the varnish. Coat the surfaces with great caution at first. Surfaces can be walked on after 3 days with 2-3 coatings or after 7 days if full coating is applied.
Featurescolourless
Size (L / ml / g / gal /oz)500ml
0 review(s)
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews