Hayward Salt And Swim Salt Electrolyser For Pools Up To 150 M3

Hayward Salt and Swim Salt Electrolyser for pools up to 150m³

Hayward Electrolyser

ITS STRENGTHS

HOW IT WORKS

Water treatment: Chlorine is produced by the electrolysis of water with a low salt concentration. The electrolytic cell produces sodium hypochlorite from 3 g of salt per litre. Chlorine fights and eliminates bacteria and viruses.

The cell connects to the outside of the electronic housing without needing to open the cover. The cell cable is 1.5 m long.
The electronic housing can be mounted on the wall without needing to open the cover.

Easy and precise settings thanks to the LED display: The disinfection status is indicated by the colour of the housing (blue, green, purple, yellow, orange). Salt & Swim 2.0 changes colour according to the associated setting, particularly during chlorine production with or without the cover closed.

WHICH MODEL FOR WHICH POOL?

Installation of its electrolyser

It is recommended to use a 16 A timed circuit breaker for this device. If the power supply is shared with other devices, consult a technician to ensure the proper sizing of the installation.

Installation and connection of the cell

It should be installed vertically, in bypass, at the highest point of the installation. You will find bypass kits for sale on our site.
1) Install the cell vertically.
2) Install the cell in bypass.
3) Install the cell at the highest point of the installation.
4) Connect the cell and the gas detector to the housing.

Dimensions

Specifications of Hayward SALT&SWIM 2.0 Electrolyser

• Adjustable chlorine production
• Easy installation and reduced maintenance
• Visual control thanks to the transparent cell
• Intuitive LED display