DIVERSEY floor stripper for linoleum taski jontec linosafe - 5L

DIVERSEY Floor Stripper for Linoleum TASKI Jontec Linosafe - 5L powerful solvent-based stripper for the removal of protective layers on linoleum and other water-resistant hard floors. TASKI Jontec Linosafe perfectly respects the colour of even the oldest linoleum floors.

• Highly effective slightly alkaline stripper
• Formulated to safely remove emulsions from linoleum floors
• Low foaming
• Acts quickly
• Safe to use on all types of water-resistant hard floors, particularly linoleum and limestone (such as marble floors)
• Easy and safe application
• Slightly scented for pleasant use
• Quickly and completely removes emulsion films

• Appearance: clear liquid
• Colour: Yellow
• Odour: Neutral
• Relative density [20°C]: 1.03
• Pure pH: 9.6 - 10.3
• Contains: 5 L
• Instructions for use: Minimum dosage: 2L for 10L of solution (20% / 1:5). Increase concentration to 50% for stubborn films. Dose TASKI Jontec Linosafe into a bucket/tank filled with water, apply the solution, and let it act for at least 5-10 minutes without allowing the solution to dry. Then scrub the floor using a single brush equipped with an appropriate pad and vacuum up the residual water. Rinse with clean water. Wait for the floor to be completely dry before protecting it. Use TASKI Jontec Linosafe diluted to 5 to 10% to perfectly remove the film-forming protective layer from new coverings.

A DIVERSEY Floor Stripper for Linoleum TASKI Jontec Linosafe - 5L
Delivered in its original packaging
Use these products with care. Before use, read the label and product information.