Loading
In stock
Bivalent operation with heat exchanger or 1250 W electric resistance at 230 V. (upon request, a 110V resistance boiler for the US market). High insulation between tank and casing made of expanded polyurethane, in order to maintain water temperature for at least 123 hours. Oversized heat exchanger that provides a practical performance much higher than competing products with double capacity. Can be installed horizontally or vertically. Safety valve set at 4 bar, test pressure at 8 bar. Model A) With enameled glass boiler and aluminum outer coating. Cathodic protection with magnesium anode. Enameled heat exchanger. Model B) With AISI 316 stainless steel boiler and mirror-polished aluminum-like stainless steel outer coating. Stainless steel heat exchanger. Complete with front drain tap. Can be installed on all three axes.Part NUM 50.289.49
In stock
Internal tank and corrugated coil in stainless steel AISI 316. Outer casing in gray polypropylene. Electric resistance in copper-nickel plated, 750 W at 220 V. Safety valve set at 6 bar. Insulation with CFC-free expanded polyurethane. Fixing brackets in stainless steel AISI 304. Thermostatic mixer 50.189.58 to be purchased separately.Part NUM 50.292.01
In stock
Boiler Nautico B3 Lt.15 C/Scamb. 500W Nautical Boiler B3 Lt.15 With Heat Exchanger 500WPart NUM GF.240715
In stock
Internal tank, coil, and outer casing in stainless steel. The tank is guaranteed for 5 years against leaks. It operates with a copper-nickel resistance of 750 W at 220 V, or with a heat exchanger connected to the engine cooling system. The resistance is positioned at the bottom of the water heater to prevent heat stratification. Double thermostat (service and safety). Safety valve at 7 bar. Expanded polyurethane insulation. Possibility of vertical or horizontal installation.Part NUM 50.290.00
In stock
Bivalent operation with heat exchanger or 1250 W electric resistance at 230 V. (upon request, a 110V resistance boiler for the US market). High insulation between tank and casing made of expanded polyurethane, in order to maintain water temperature for at least 123 hours. Oversized heat exchanger that provides a practical performance much higher than competing products with double capacity. Can be installed horizontally or vertically. Safety valve set at 4 bar, test pressure at 8 bar. Model A) With enameled glass boiler and aluminum outer coating. Cathodic protection with magnesium anode. Enameled heat exchanger. Model B) With AISI 316 stainless steel boiler and mirror-polished aluminum-like stainless steel outer coating. Stainless steel heat exchanger. Complete with front drain tap. Can be installed on all three axes.Part NUM 50.289.49
In stock
Internal tank, coil, and outer casing in stainless steel. The tank is guaranteed for 5 years against leaks. It operates with a copper-nickel resistance of 750 W at 220 V, or with a heat exchanger connected to the engine cooling system. The resistance is positioned at the bottom of the water heater to prevent heat stratification. Double thermostat (service and safety). Safety valve at 7 bar. Expanded polyurethane insulation. Possibility of vertical or horizontal installation.Part NUM 50.290.00
In stock
Internal tank, coil, and outer casing in stainless steel. The tank is guaranteed for 5 years against leaks. It operates with a copper-nickel resistance of 750 W at 220 V, or with a heat exchanger connected to the engine cooling system. The resistance is positioned at the bottom of the water heater to prevent heat stratification. Double thermostat (service and safety). Safety valve at 7 bar. Expanded polyurethane insulation. Possibility of vertical or horizontal installation.Part NUM 50.290.00
In stock
Assembly in the most suitable position. Through two flexible tube outlets with a diameter of 75 mm, two adjustable nozzles are reached to be mounted on the bulkhead. Same technical characteristics as model 50.263.00. Kit including heater + 4-position panel switch + mounting bracket + 3.60 m of tubing + 2 nozzles + power cable + screws. It utilizes the engine's cooling water to transfer heat into the cabin. 3-speed motor, extremely simple and fast installation.Part NUM 50.263.01
In stock
Kit including heater + 4-position panel switch + electrical cable + screws. It utilizes the engine's cooling water to transmit heat in the cabin. 3-speed engine, extremely easy and fast installation.Part NUM 50.263.00
In stock
Internal tank and corrugated coil in stainless steel AISI 316. Outer casing in gray polypropylene. Electric resistance in copper-nickel plated, 750 W at 220 V. Safety valve set at 6 bar. Insulation with CFC-free expanded polyurethane. Fixing brackets in stainless steel AISI 304. Thermostatic mixer 50.189.58 to be purchased separately.Part NUM 50.292.01
In stock
Internal tank, coil, and outer casing in stainless steel. The tank is guaranteed for 5 years against leaks. It operates with a copper-nickel resistance of 750 W at 220 V, or with a heat exchanger connected to the engine cooling system. The resistance is positioned at the bottom of the water heater to prevent heat stratification. Double thermostat (service and safety). Safety valve at 7 bar. Expanded polyurethane insulation. Possibility of vertical or horizontal installation.Part NUM 50.290.00
In stock
Internal tank, coil, and outer casing in stainless steel. The tank is guaranteed for 5 years against leaks. It operates with a copper-nickel resistance of 750 W at 220 V, or with a heat exchanger connected to the engine cooling system. The resistance is positioned at the bottom of the water heater to prevent heat stratification. Double thermostat (service and safety). Safety valve at 7 bar. Expanded polyurethane insulation. Possibility of vertical or horizontal installation.Part NUM 50.290.00
In stock
Internal tank, coil, and outer casing in stainless steel. The tank is guaranteed for 5 years against leaks. It operates with a copper-nickel resistance of 750 W at 220 V, or with a heat exchanger connected to the engine cooling system. The resistance is positioned at the bottom of the water heater to prevent heat stratification. Double thermostat (service and safety). Safety valve at 7 bar. Expanded polyurethane insulation. Possibility of vertical or horizontal installation.Part NUM 50.290.00
In stock
Internal tank and corrugated coil in stainless steel AISI 316. Outer casing in gray polypropylene. Electric resistance in copper-nickel plated, 750 W at 220 V. Safety valve set at 6 bar. Insulation with CFC-free expanded polyurethane. Fixing brackets in stainless steel AISI 304. Thermostatic mixer 50.189.58 to be purchased separately.Part NUM 50.292.01
In stock
Bivalent operation with heat exchanger or 1250 W electric resistance at 230 V. (upon request, a 110V resistance boiler for the US market). High insulation between tank and casing made of expanded polyurethane, in order to maintain water temperature for at least 123 hours. Oversized heat exchanger that provides a practical performance much higher than competing products with double capacity. Can be installed horizontally or vertically. Safety valve set at 4 bar, test pressure at 8 bar. Model A) With enameled glass boiler and aluminum outer coating. Cathodic protection with magnesium anode. Enameled heat exchanger. Model B) With AISI 316 stainless steel boiler and mirror-polished aluminum-like stainless steel outer coating. Stainless steel heat exchanger. Complete with front drain tap. Can be installed on all three axes.Part NUM 50.289.49
In stock
Internal tank, coil, and outer casing in stainless steel. The tank is guaranteed for 5 years against leaks. It operates with a copper-nickel resistance of 750 W at 220 V, or with a heat exchanger connected to the engine cooling system. The resistance is positioned at the bottom of the water heater to prevent heat stratification. Double thermostat (service and safety). Safety valve at 7 bar. Expanded polyurethane insulation. Possibility of vertical or horizontal installation.Part NUM 50.290.00
In stock
Internal tank, coil, and outer casing in stainless steel. The tank is guaranteed for 5 years against leaks. It operates with a copper-nickel resistance of 750 W at 220 V, or with a heat exchanger connected to the engine cooling system. The resistance is positioned at the bottom of the water heater to prevent heat stratification. Double thermostat (service and safety). Safety valve at 7 bar. Expanded polyurethane insulation. Possibility of vertical or horizontal installation.Part NUM 50.290.00
In stock
Internal tank and corrugated coil in stainless steel AISI 316. Outer casing in gray polypropylene. Electric resistance in copper-nickel plated, 750 W at 220 V. Safety valve set at 6 bar. Insulation with CFC-free expanded polyurethane. Fixing brackets in stainless steel AISI 304. Thermostatic mixer 50.189.58 to be purchased separately.Part NUM 50.292.01
In stock
Internal tank and corrugated coil in stainless steel AISI 316. Outer casing in gray polypropylene. Electric resistance in copper-nickel plated, 750 W at 220 V. Safety valve set at 6 bar. Insulation with CFC-free expanded polyurethane. Fixing brackets in stainless steel AISI 304. Thermostatic mixer 50.189.58 to be purchased separately.Part NUM 50.292.01
In stock
Internal tank and corrugated coil in stainless steel AISI 316. Outer casing in gray polypropylene. Electric resistance in copper-nickel plated, 750 W at 220 V. Safety valve set at 6 bar. Insulation with CFC-free expanded polyurethane. Fixing brackets in stainless steel AISI 304. Thermostatic mixer 50.189.58 to be purchased separately.Part NUM 50.292.01