Loading
Terminal boards are an electrical component that terminates a single wire and connects it to a circuit or system.
In the YACHTNEEDS marketplace Terminal Boards & Shunts section, you’ll find a variety of shunts, bus-bar heavy duty terminals, watertight terminal boards, and watertight shunt boxes.
Manufacturer
Manufacturer
In stock
In black plastic, with a transparent protective band. Separators for accidental contacts. Terminals and screws in nickel-plated brass.Part NUM 14.206.35
In stock
High insulation capacity plastic base. Nickel-plated copper support bar, stainless steel screws and nuts. 12/48 volts.Part NUM 14.207.04
In stock
High insulation capacity plastic base. Nickel-plated copper support bar, stainless steel screws and nuts. 12/48 volts.Part NUM 14.207.04
In stock
Suitable for high amperages, which are determined not by the terminal but by the diameter of the electrical cables. Nylon/fiberglass base. Stainless steel pin. Chrome-plated brass nuts.Part NUM 14.205.00
In stock
With nickel-plated brass terminal clamps. Separators to prevent accidental contacts.Part NUM 14.206.21
In stock
With nickel-plated brass terminal clamps. Separators to prevent accidental contacts.Part NUM 14.206.21
In stock
Suitable for high amperages, which are determined not by the terminal but by the diameter of the electrical cables. Nylon/fiberglass base. Stainless steel pin. Chrome-plated brass nuts.Part NUM 14.205.00
In stock
Suitable for high amperage. Nylon/fiberglass base. Stainless steel pin and nuts.Part NUM 14.205.20
In stock
With nickel-plated brass terminal clamps. Separators to prevent accidental contacts.Part NUM 14.206.21
In stock
High insulation capacity plastic base. Nickel-plated copper support bar, stainless steel screws and nuts. 12/48 volts.Part NUM 14.207.04
In stock
Watertight connectors compliant with ISO 15083. To assemble a connector example with 2 pins, the following components are needed: 1x14.235.30 / 1x14.235.40 / 2x14.236.45 / 2x15.236.46 / 4x14.236.48.Part NUM 14.235.10
In stock
High insulation capacity plastic base. Nickel-plated copper support bar, stainless steel screws and nuts. 12/48 volts.Part NUM 14.207.04
In stock
High insulation capacity plastic base. Nickel-plated copper support bar, stainless steel screws and nuts. 12/48 volts.Part NUM 14.207.04
In stock
High insulation capacity plastic base. Nickel-plated copper support bar, stainless steel screws and nuts. 12/48 volts.Part NUM 14.207.04
In stock
Made of nylon/fiberglass. Possibility to pass cables on all 4 sides.Part NUM 14.209.29
In stock
In black plastic, with a transparent protective band. Separators for accidental contacts. Terminals and screws in nickel-plated brass.Part NUM 14.206.35
In stock
Bus Bar Cover 145 x 31 mm - 14.208.10Part NUM 14.208.10
In stock
High insulation capacity plastic base. Nickel-plated copper support bar, stainless steel screws and nuts. 12/48 volts.Part NUM 14.207.04
In stock
Suitable for high amperages, which are determined not by the terminal but by the diameter of the electrical cables. Nylon/fiberglass base. Stainless steel pin. Chrome-plated brass nuts.Part NUM 14.205.00
In stock
Female brass fitting - 14.236.46Part NUM 14.236.46