Loading
Manufacturer
Colour
Length (cm)
Width (cm)
Manufacturer
Colour
Length (cm)
Width (cm)
In stock
In polyester fabric with waterproof polyurethane coating, perimeter elastic for better grip. UV resistant. - Driver console cover - 46.509.03 - OemPart NUM 46.509.02
In stock
In polyester fabric with waterproof polyurethane coating, perimeter elastic for better grip. UV resistant. - Console cover for driving - 46.509.09 - OemPart NUM 46.509.02
In stock
Polyester fabric buildings with a waterproof polyurethane coating, perimeter elastic for better adherence to the boat's walls. UV resistant. Double stitching, perimeter rings for tensioning the tarp. - Inflatable boat cover 300/360 cm gray 300D - 46.501.02 - OemPart NUM 46.501.01
In stock
Polyester fabric buildings with a waterproof polyurethane coating, perimeter elastic for better adherence to the boat's walls. UV resistant. Double stitching, perimeter rings for tensioning the tarp. - Universal tarpaulin cm 427/488 gray 300D - 46.503.01 - OemPart NUM 46.503.01
In stock
Made of polyester fabric with a waterproof polyurethane coating. - Seat cover 60x60x65 cm gray 300D single seat - 48.688.02 - OemPart NUM 48.688.01
In stock
Buildings made of heavy 1000 denier fabric, also suitable for towing on boat trailers. They are made of extremely resistant "Supermare" fabric.Part NUM 46.178.20
In stock
Sturdy cyclone polyester buildings that allow for a speed of up to 60 km/h on the road trailer. Breathable and UV resistant fabric. - Tarpaulin 7115 x 3520 mm - 46.172.05 - OemPart NUM 46.172.01
In stock
Complete with opening for a possible Roll bar. Breathable UV resistant fabric of 280 g/m2 high tenacity, which can also be used for towing on a cart up to 60 km/h. Fastened with Velcro and zip closure. Equipped with two Cam Cleats to tighten the tarpaulin easily. - Tailored cover for 570/590 cm inflatable boat - 46.165.04 - OemPart NUM 46.165.01
In stock
Complete with opening for a possible Roll bar. Breathable UV resistant fabric of 280 g/m2 high tenacity, which can also be used for towing on a cart up to 60 km/h. Fastened with Velcro and zip closure. Equipped with two Cam Cleats to tighten the tarpaulin easily. - Sewing cover for inflatable boat cm 840/870 - 46.165.11 - OemPart NUM 46.165.01
In stock
Suitable for round/square tip inflatable boats. Designed to completely cover even the outboard engine. Breathable and UV resistant fabric. UV resistant. Can be used for towing on a trailer up to 60 Km/h. - Inflatable boat cover cm 230/260 grey - 46.166.01 - OemPart NUM 46.166.01
In stock
Buildings made of sturdy blue (while stocks last) or grey polyester fabric. Resistant to water and UV rays. The sturdy structure allows them to be used on road-trailers as well. - Open hull tarpaulin 4800/5200 - 46.170.05 - OemPart NUM 46.170.01
In stock
Suitable for round/square tip inflatable boats. Designed to completely cover even the outboard engine. Breathable and UV resistant fabric. UV resistant. Can be used for towing on a trailer up to 60 Km/h. - Gray tarpaulin for inflatable boats 260/290 cm - 46.166.02 - OemPart NUM 46.166.01
In stock
Buildings made of sturdy blue (while stocks last) or grey polyester fabric. Resistant to water and UV rays. The sturdy structure allows them to be used on road-trailers as well. - Open hull tarpaulin 7000/7700 - 46.170.13 - OemPart NUM 46.170.01
In stock
Polyethylene cover to protect boats during storage. It comes in rolls of 50 m, with two continuous elastics inserted on the outer edges. Installation instructions: 1) Unroll the cover from the stern to the bow, keeping it centered on the boat and leaving an excess of about 50 cm on each side. 2) Apply two straps spaced about 30 cm apart and cut the cover used from the rest of the coil. 3) Pull out the elastics and tie them. 4) Open the cover on the boat. 5) Pull the elastic from one end and tie it to keep it under tension. 6) Use the appropriate pre-cuts with reinforcements if necessary to connect the perimeter elastic transversely. - Polyethylene sheet 8 x 50 m - 46.174.02 - OemPart NUM 46.174.00
In stock
Polyethylene cover to protect boats during storage. It comes in rolls of 50 m, with two continuous elastics inserted on the outer edges. Installation instructions: 1) Unroll the cover from the stern to the bow, keeping it centered on the boat and leaving an excess of about 50 cm on each side. 2) Apply two straps spaced about 30 cm apart and cut the cover used from the rest of the coil. 3) Pull out the elastics and tie them. 4) Open the cover on the boat. 5) Pull the elastic from one end and tie it to keep it under tension. 6) Use the appropriate pre-cuts with reinforcements if necessary to connect the perimeter elastic transversely. - Polyethylene sheet 10 x 50 m - 46.174.03 - OemPart NUM 46.174.00
In stock
Buildings made of heavy 1000 denier fabric, also suitable for towing on boat trailers. They are made of extremely resistant "Supermare" fabric. - Boat cover for motorboats 670/700 cm - 46.178.60 - TessilmarePart NUM 46.178.20
Osculati
Available upon request
Tarpaulin for dinghy 360/390 - width 190 cm - grey - 281 - Grey - 360 - 390 - 190Part NUM 46.166.05
Osculati
Available upon request
Open hull tarpaulin 390/410 cm - max boat width 180 cmPart NUM 46.203.31
Osculati
Available upon request
Tarpaulin universal 427/488 x 180 cm - 300D - greyPart NUM 46.503.01
Osculati
Available upon request
Tarpaulin for dinghy 230/260 - width 150 cm - greyPart NUM 46.166.01