Loading
Manufacturer
Colour
Length (cm)
Width (cm)
Manufacturer
Colour
Length (cm)
Width (cm)
In stock
Suitable for round/square tip inflatable boats. Designed to completely cover even the outboard engine. Breathable and UV resistant fabric. UV resistant. Can be used for towing on a trailer up to 60 Km/h. - Inflatable boat cover cm 230/260 grey - 46.166.01 - OemPart NUM 46.166.01
In stock
Buildings made of sturdy blue (while stocks last) or grey polyester fabric. Resistant to water and UV rays. The sturdy structure allows them to be used on road-trailers as well. - Open hull tarpaulin 4800/5200 - 46.170.05 - OemPart NUM 46.170.01
In stock
Suitable for round/square tip inflatable boats. Designed to completely cover even the outboard engine. Breathable and UV resistant fabric. UV resistant. Can be used for towing on a trailer up to 60 Km/h. - Gray tarpaulin for inflatable boats 260/290 cm - 46.166.02 - OemPart NUM 46.166.01
In stock
Buildings made of sturdy blue (while stocks last) or grey polyester fabric. Resistant to water and UV rays. The sturdy structure allows them to be used on road-trailers as well. - Open hull tarpaulin 7000/7700 - 46.170.13 - OemPart NUM 46.170.01
In stock
Polyethylene cover to protect boats during storage. It comes in rolls of 50 m, with two continuous elastics inserted on the outer edges. Installation instructions: 1) Unroll the cover from the stern to the bow, keeping it centered on the boat and leaving an excess of about 50 cm on each side. 2) Apply two straps spaced about 30 cm apart and cut the cover used from the rest of the coil. 3) Pull out the elastics and tie them. 4) Open the cover on the boat. 5) Pull the elastic from one end and tie it to keep it under tension. 6) Use the appropriate pre-cuts with reinforcements if necessary to connect the perimeter elastic transversely. - Polyethylene sheet 8 x 50 m - 46.174.02 - OemPart NUM 46.174.00
In stock
Polyethylene cover to protect boats during storage. It comes in rolls of 50 m, with two continuous elastics inserted on the outer edges. Installation instructions: 1) Unroll the cover from the stern to the bow, keeping it centered on the boat and leaving an excess of about 50 cm on each side. 2) Apply two straps spaced about 30 cm apart and cut the cover used from the rest of the coil. 3) Pull out the elastics and tie them. 4) Open the cover on the boat. 5) Pull the elastic from one end and tie it to keep it under tension. 6) Use the appropriate pre-cuts with reinforcements if necessary to connect the perimeter elastic transversely. - Polyethylene sheet 10 x 50 m - 46.174.03 - OemPart NUM 46.174.00
In stock
Buildings made of heavy 1000 denier fabric, also suitable for towing on boat trailers. They are made of extremely resistant "Supermare" fabric. - Boat cover for motorboats 670/700 cm - 46.178.60 - TessilmarePart NUM 46.178.20
In stock
Polyethylene cover to protect boats during storage. It comes in rolls of 50 m, with two continuous elastics inserted on the outer edges. Installation instructions: 1) Unroll the cover from the stern to the bow, keeping it centered on the boat and leaving an excess of about 50 cm on each side. 2) Apply two straps spaced about 30 cm apart and cut the cover used from the rest of the coil. 3) Pull out the elastics and tie them. 4) Open the cover on the boat. 5) Pull the elastic from one end and tie it to keep it under tension. 6) Use the appropriate pre-cuts with reinforcements if necessary to connect the perimeter elastic transversely. - Polyethylene sheet 4 x 50 m - 46.174.00 - OemPart NUM 46.174.00
In stock
Polyethylene cover to protect boats during storage. It comes in rolls of 50 m, with two continuous elastics inserted on the outer edges. Installation instructions: 1) Unroll the cover from the stern to the bow, keeping it centered on the boat and leaving an excess of about 50 cm on each side. 2) Apply two straps spaced about 30 cm apart and cut the cover used from the rest of the coil. 3) Pull out the elastics and tie them. 4) Open the cover on the boat. 5) Pull the elastic from one end and tie it to keep it under tension. 6) Use the appropriate pre-cuts with reinforcements if necessary to connect the perimeter elastic transversely.Part NUM 46.174.00
In stock
Polyethylene cover to protect boats during storage. It comes in rolls of 50 m, with two continuous elastics inserted on the outer edges. Installation instructions: 1) Unroll the cover from the stern to the bow, keeping it centered on the boat and leaving an excess of about 50 cm on each side. 2) Apply two straps spaced about 30 cm apart and cut the cover used from the rest of the coil. 3) Pull out the elastics and tie them. 4) Open the cover on the boat. 5) Pull the elastic from one end and tie it to keep it under tension. 6) Use the appropriate pre-cuts with reinforcements if necessary to connect the perimeter elastic transversely. - Polyethylene tarpaulin 15 x 50 m - 46.174.04 - OemPart NUM 46.174.00
In stock
Buildings made of heavy 1000 denier fabric, also suitable for towing on boat trailers. They are made of extremely resistant "Supermare" fabric. - Boat cover for motorboats 510/550 cm - 46.178.40 - TessilmarePart NUM 46.178.20
In stock
Made with CYCLONETM waterproof and UV resistant fabric weighing 220 gr/m2. Also ideal for protecting cushions from the sun. - Front awning T-Top 275/305 cm extension - 48.198.04 - OemPart NUM 48.198.01
In stock
Film in white shrinkable polyethylene. Resistant to ultraviolet rays through special additives, it is the ideal cover for storing and/or transporting any type of boat, protecting it from dirt, small impacts, high temperatures, etc. It is easily applied by spreading the product from bow to stern and carefully heating it with specific heat guns. Product sold on a reel (price may vary depending on weight).Part NUM 46.176.06
In stock
Complete with opening for a possible Roll bar. Breathable UV resistant fabric of 280 g/m2 high tenacity, which can also be used for towing on a cart up to 60 km/h. Fastened with Velcro and zip closure. Equipped with two Cam Cleats to tighten the tarpaulin easily. - Sewing cover for inflatable boat cm 840/870 - 46.165.11 - OemPart NUM 46.165.01
In stock
Boat Cover Covy Line 7Mt-7.80Part NUM TR.O2270780
In stock
Film in white shrinkable polyethylene. Resistant to ultraviolet rays through special additives, it is the ideal cover for storing and/or transporting any type of boat, protecting it from dirt, small impacts, high temperatures, etc. It is easily applied by spreading the product from bow to stern and carefully heating it with specific heat guns. Product sold on a reel (price may vary depending on weight). - Heat shrinkable 10 m multipurpose - 46.176.10 - OemPart NUM 46.176.06
In stock
Film in white shrinkable polyethylene. Resistant to ultraviolet rays through special additives, it is the ideal cover for storing and/or transporting any type of boat, protecting it from dirt, small impacts, high temperatures, etc. It is easily applied by spreading the product from bow to stern and carefully heating it with specific heat guns. Product sold on a reel (price may vary depending on weight).Part NUM 46.176.06
In stock
Polyester fabric buildings with a waterproof polyurethane coating, perimeter elastic for better adherence to the boat's walls. UV resistant. Double stitching, perimeter rings for tensioning the tarp. - Universal tarpaulin cm 580/650 gray 300D - 46.503.11 - OemPart NUM 46.503.01
In stock
Polyester fabric buildings with a waterproof polyurethane coating, perimeter elastic for better adherence to the boat's walls. UV resistant. Double stitching, perimeter rings for tensioning the tarp. - Universal tarpaulin cm 427/488 grey 300D - 46.503.03. - OemPart NUM 46.503.01
In stock
Polyester fabric buildings with a waterproof polyurethane coating, perimeter elastic for better adherence to the boat's walls. UV resistant. Double stitching, perimeter rings for tensioning the tarp. - Universal tarpaulin cm 488/564 grey 300D - 46.503.06 - OemPart NUM 46.503.01