Engineering Electrical components and spares

Battery charger and inverters

131 items

In stock

Three-stage IUOU charger with a microprocessor that perfectly adapts to the type of charge required by the battery, a very important function for sealed batteries. Two isolated outputs. The second, limited to 4 A, is dedicated to starting batteries. Automatic battery temperature compensation system. Important for sealed batteries as it extends their lifespan. Technical data: Power supply 180/264 VAC - 180/400 VDC - 45/65 Hz.

Part NUM 14.267.01

€ 875.57

In stock

Developed with Sinumax technology for professional use, they guarantee the necessary power with reduced size. The particular feature of Sinumax technology is the high peak power for startups, as required by refrigerators, electric motors, lamps, etc. Technical features include an aluminum casing, forced ventilation with temperature sensors, protection against short circuits, alarm for excessively high or low battery voltage, reverse polarity, output voltage return, etc. If you want the automatic switching function to another AC power source, we recommend the Multiplus inverter/charger, which has this integrated function and you can deactivate only the charger. Phoenix: a) Connection to PC via VE-Bus to USB port. b) Remote on/off. Phoenix Smart: a) Configurable integrated Bluetooth with tablet or smartphone. b) VE-DIRECT serial port for connection to PC via VE-Direct to USB cable. c) ECO mode that puts the inverter in Stand-by if the load drops below a preset value. d) Remote on/off.

Part NUM 14.270.15

€ 9.15

In stock

Synchronized parallel operation.

Part NUM 14.267.03

€ 1,485.48

In stock

Developed for professional use, they utilize Sinumax technology which ensures the necessary power with reduced weight and size. Sinumax is also compatible with the power surges required at startup by certain devices such as refrigerators, electric motors, and similar, unlike traditional "switching" inverters that do not handle power spikes optimally. Technical features: aluminum casing, forced ventilation with temperature sensor. Protections: against short circuit, overload, battery voltage too low or too high with alarm, excessive temperature.

Part NUM 14.270.07

€ 160.61

In stock

This is a powerful relay that automatically connects the batteries in parallel when one of them reaches the predetermined voltage and separates them when the voltage drops below the FLOATING level. The Cryrix-I is a great alternative to diode separators as there is no voltage drop. The classic installation involves the alternator directly connected to the starting battery. The service battery and bow thruster are connected to the starting battery with the Cyrix-I. When the Cyrix-I senses that the starting battery is fully charged, it will activate and allow parallel charging of the other batteries. The Cryix-I detects the voltage of both batteries and will activate if, for example, the service battery is under the charger.

Part NUM 14.263.01

€ 332.13

In stock

The "adaptive" microprocessor control system is able to perfectly control the type of charge to be applied to the batteries, a very important feature in the case of sealed batteries. 4-stage charging: Bulk-absorption-float storage. The storage function automatically reduces the "FLOAT" function to 13.2 / 26.4 V in order to minimize gassing and corrosion of the positive plates. Technical data: Aluminum casing.

Part NUM 14.266.01

€ 800.72

In stock

Using the Victron-connect App, these chargers connect to your smartphone, tablet or computer via Bluetooth, allowing for initial configuration and displaying all charging data. Power supply 180-265 VAC. 4-stage charging algorithm. BULK - ABSORPTION - FLOAT - STORAGE. Less battery aging and maintenance when not in use, with the STORAGE MODE system. Protection against overloads, short circuits, overheating. Efficiency of 92% and above, with very low heat dissipation.

Part NUM 14.273.13

€ 177.55

In stock

- Bluetooth enabled: any Bluetooth device can be used to monitor, change settings, and update the charger. - Version 1+1: second 3A output designed for jump-start battery charging. - Version 3: each output provides maximum nominal charge. - Automatic voltage compensation, caused by voltage drops in DC cables. - 5-stage charging algorithm: constant current, absorption, reconditioning, maintenance, and storage. - Calibrated charging depending on whether the boat is connected to shore AC power or not. - BatterySafe: prevents battery gasification damage. - Storage mode: if the battery does not discharge for 24 consecutive hours, this mode minimizes gasification and plate corrosion. - Universal power supply 90/265 VAC 90/400 VDC-45/60 Hz. - Protection against overvoltage, short circuit, and over temperature. - Also charges Li-ion batteries. - Programmable charging algorithm (via Bluetooth). - Remote on/off. - VE Direct interface.

Part NUM 14.207.30

€ 491.55

In stock

Part NUM 14.207.30

€ 615.92

In stock

3-stage IUoUo automatic chargers, with independent outputs to simultaneously charge 3 banks - full power batteries. Technical data: - Aluminum housing.

Part NUM 14.274.02

€ 765.69

In stock

Part NUM 14.270.07

€ 38.04

In stock

This device disconnects the battery from non-essential loads before it is completely discharged and prevents the engine from starting.

Part NUM 14.275.11

€ 125.61

In stock

Part NUM 14.273.13

€ 229.46

In stock

Using the Victron-Connect APP, these battery chargers connect to your smartphone, tablet, or computer via Bluetooth, allowing for initial configuration and displaying all charging data. Power supply 180-265 V AC, charge status LED indicators. 7-stage charging algorithm, ideal for sealed batteries. Suitable for all battery types, including Li-ion. Automatic compensation for high-low temperatures. LOW system for charging small batteries. Program for recovering a fully discharged battery. Automatic power supply function. Accessories included: connection clamps, M8 eyelets.

Part NUM 14.273.06

€ 10.87

In stock

They prevent galvanic corrosion caused by different metals present in the boat. They prevent galvanic currents from entering through the power cables from the dock.

Part NUM 14.275.40

€ 393.71

In stock

DC/DC converters for charging 12/24 V service batteries. Particularly suitable in the case of boats equipped with smart alternators, used in newer engines, which do not always generate the correct charging current.

Part NUM 14.277.60

€ 867.13

In stock

Many on-board devices require stabilized voltage or voltage change. Galvanic isolation both on input and output eliminates problems related to line loss or power interruption due to overload. Adjustable output voltage, can also be used as a battery charger, equipped with a 3-stage charging algorithm. Remote control with low voltage switch or relay. All models can be connected in parallel to increase the output current. They can be controlled and calibrated remotely via Bluetooth.

Part NUM 14.277.01

€ 206.52

In stock

Part NUM 14.270.15

€ 112.33

In stock

Part NUM 14.277.01

€ 206.52

In stock

Solo 24V/230VAC converter - 1800VA

Part NUM CRISEEL006090

€ 2,325.83