Single Burner Hob - With Smoked Tempered Glass Lid - Fl Series - Can

1 Burner Cooking Hob - with Smoked Tempered Glass Lid - FL Series - CAN

CAN Combined cooking hob with 1 burner gas stove and stainless steel sink for the interior layout of motorhomes, vans, campers, or boats.

Equipped with a foldable glass lid that is scratch-resistant.

This combined stove/sink has compact dimensions allowing it to be installed on small work surfaces.

Of high-quality manufacturing from the Italian CAN, the entire unit is made of shiny stainless steel and features a scratch-resistant treated glass lid.

Once lowered, the lid significantly enlarges the work surface.

Very well finished, all corners of the combined cooking hob and sink are rounded to facilitate cleaning.

The stove is equipped with a thermocouple safety feature that stops the gas flow if no flame is present.

How is the sink connected to the water supply?

First, note that the combined unit does not come with its tap, which allows you to choose your own based on your water system: with or without a switch, with or without a mixer...

For water drainage, the hole is ø 70 mm and the drain plug is not included, so you will need to order a drain plug separately.

How do I connect the hob to my gas supply?

For gas supply, this stove is CE certified for butane (28 - 30 mBar), GPL (30 mBar), and propane (30 - 37 mBar) and is therefore also suitable if, like many, you have CAMPINGAZ gas bottles (R901, R904, or R907).

Under the stove, there is a gas inlet connection RST 8 mm, which means a reinforced stainless steel pipe with a diameter of 8 mm (outer) designed to receive an RSV 8 mm connection.

An RSV connection is a cone-shaped fitting whose sealing is achieved via a compression olive on the pipe and the olive.

As the gas inlet pipe of the stove is reinforced, there is no need to add a crush-resistant sleeve.

How is this combined unit fixed to the kitchen worktop?

On the worktop, the cooking hob is installed by embedding it; the best method is to glue it directly with a bonding sealant.

You need to allow for a hole of 520 x 320 mm, with a depth of 180 mm without the drain plug in place.

When positioning it on the worktop, be sure to place it as far away as possible from a wall on the side to avoid obstruction when placing a stove and to prevent burning the wall.

Specifications: 

• Sink material: stainless steel
• Hob material: stainless steel
• Glass lid
• Number of burners: 1
• Power of burners: 1700 W
• Gas supply: butane, propane, and GPL
• Gas supply pressure: 28 - 30 mBar (butane and GPL); 37 mBar (propane)
• Gas connection: RST ø 8 mm (for RSV connection (cone 8 mm)
• Ignition: manual
• Thermocouple safety: yes
• External dimensions: 530 x 340 x H 170 mm
• Weight: 3.8 kg
• Certification: CE
•