Special chemical sealing blowgun - 200 ml

This200ml blow gun for chemical sealing allows you to easily blow away dust thanks to its manual pump. It is advisable to thoroughly clean the hole before applying the chemical sealant for an effective and durable installation.

• The blow gun is an essential tool for easily removing dust
• Specifically designed for cleaning before applying chemical sealant
• Helps improve the quality of the seal

• Weight: 100 g
• Reference: FIX-SOUFFL

For hollow materials, it is the diameter of the sieve that determines the drilling diameter
For solid materials, it is the diameter of the threaded rod that will be your reference, to which you need to add 2mm
Drill the hole to the desired dimensions
Carefully dust the holes by blowing air into them
For a perfect seal in solid masonry or concrete, after drilling the hole, you must blow 4 times using a blow gun, brush 4 times with a brush, then blow again 4 times
Place the resin cartridge and cut the end (discard the first centimetre of mixture)
Inject the sealant starting from the bottom of the hole and in sufficient quantity
For hollow materials only: insert the sieve ensuring that the centring ring is open, then inject the resin into the sieve and close the centring ring, then insert the threaded rod during the handling time, turning until it reaches the bottom of the sieve
For solid materials, the same operation is performed but without the sieves

A blow gun for chemical sealing
Delivered in its original packaging