Pack of 10 M6 Threaded Rods BATIFIX diameter 6 x 70mm

Pack of 10 M6 Threaded Rods BATIFIX diameter 6 x 70mm
Threaded rod for chemical fixing by resin injection for hollow or solid materials
The threaded rod must be used with a sieve for hollow materials only such as concrete blocks, hollow bricks, or hollow concrete blocks
In the case of solid materials like concrete, natural stone, and solid bricks, using a sieve is unnecessary
The threaded rods should be chosen based on the weight and dimensions of the object to be fixed
The rod must be introduced by a combination of rotation + translation while avoiding lateral movements as much as possible
USAGE ADVICE FOR CHEMICAL ANCHOR INSTALLATION
For hollow materials, it is the diameter of the sieve that determines the drilling diameter
For solid materials, it is the diameter of the threaded rod that will be your reference, to which you need to add 2mm
Drill the hole to the desired dimensions
Carefully dust the holes by blowing air into them
Set up the resin cartridge and cut the tip (discard the first centimetre of mixture)
Inject the anchor starting from the bottom of the hole and in sufficient quantity
For hollow materials only: insert the sieve ensuring that the centring ring is open, then inject the resin into the sieve and close the centring ring, then insert the threaded rod during the handling time by turning it until it reaches the bottom of the sieve
For solid materials, the same operation applies but without the sieves
As a guideline, at a temperature of 5°C the drying time is 50 min, at 20°C wait 20 min, at 30°C wait 15 min, and at 35°C wait 10 min

Diameter: 6 X 70mm
Fixing for hollow or solid materials
The threaded rod must be used with a sieve for hollow materials only such as concrete blocks, hollow bricks, or hollow concrete blocks
The chemical anchoring solution is very robust and allows for the fixing of heavy objects
Weight of the threaded rod: 15 g

10 Threaded rods in individual packaging