Pack of 10 BATIFIX centre cone sieves - diameter 20 x 130mm

This pack of 10 BATIFIX centring cone sieves diameter 20 x 130mm is designed for chemical fixing by resin injection for hollow materials. The centring cone allows for optimal guidance of the threaded rod, and the regular perforation of the sieve enables maximum diffusion of the resin.

• Centring cone allows for optimal guidance of the threaded rod
• The chemical sealing solution is very robust and allows for the fixing of heavy objects
• Pack of 10 sieves

• Diameter: 2 x 13 cm
• Fixing for hollow materials such as concrete blocks, hollow bricks, and various hollow materials
• Suitable for M12 threaded rods
• Regular perforation of the sieve for better diffusion of the resin
• Weight: 6 g
• Ref. FIXTAM-20X130

Usage tips for chemical sealing installation

• For hollow materials, it is the diameter of the sieve that determines the diameter of the drilling
• Drill the hole to the desired dimensions
• Thoroughly dust the holes by blowing air into them
• Set up the resin cartridge and cut the tip
• For hollow materials only: insert the sieve ensuring that the centring ring is open, then inject the resin into the sieve and close the centring ring, then insert the threaded rod during the handling time, turning until it reaches the bottom of the sieve.

Drying times for reference

• For a temperature of 5°C: 50 min
• For a temperature of 20°C: 20 min
• For a temperature of 30°C: 15 min
• For a temperature of 35°C: 10 min

10 x BATIFIX centring cone sieves diameter 20 x 130mm
Delivered in their original packaging