Loading
In stock
With a 5 3/4 inch BLUE EYE halogen bulb, original STANLEY with double filament and maximum range of 600 m. It produces a wide beam short light or a narrow cone depth light. It can be operated through a handle under the cover or under the Roll-bar, with a rotation of 330° and high/low ±28°. Applicable on thicknesses from 5 mm to 25 mm. With a thickness of 50 mm, the handle protrudes from 34 mm (minimum stroke, downward parabola) to 90 mm (maximum stroke, upward parabola). Spare bulbs see articles: 13.230.12/13. - Faro Night Eye 24 V - 13.005.24: Night Eye Headlight 24 V - 13.005.24. - OemPart NUM 13.005.12
In stock
Polished stainless steel carcass. Completely waterproof. 120° beam angle. High power LED equivalent to a 50W halogen bulb. Does not require recessed installation. Sold in pairs. IP68.Part NUM 13.652.01
In stock
Mirror polished AISI 316 stainless steel carcass. Attention: Due to the high temperature generated during operation, it cannot be used outside water.Part NUM 13.640.01
In stock
Mirror polished AISI 316 stainless steel carcass. Attention: Due to the high temperature generated during operation, it cannot be used outside water. - Underwater LED blue light - 13.640.02 - OemPart NUM 13.640.01
In stock
2m bars. They can be cut to the desired length. Please note that the "master" contact is every 50 cm (marked on the bar). Cutting at this measurement is very easy. However, it is possible, with precision and accuracy, to cut the bars every 10 cm and every 5 cm, so the 2m base bar can be used without any waste. This technology allows for uniform and diffused light. Suitable for both indoor and outdoor use.Part NUM 13.701.12
In stock
2m bars. They can be cut to the desired length. Please note that the "master" contact is every 50 cm (marked on the bar). Cutting at this measurement is very easy. However, it is possible, with precision and accuracy, to cut the bars every 10 cm and every 5 cm, so the 2m base bar can be used without any waste. This technology allows for uniform and diffused light. Suitable for both indoor and outdoor use. - Flexible LED light bar NeonLight 24V blue - 13.702.24 - OemPart NUM 13.701.12
In stock
2m bars. They can be cut to the desired length. Please note that the "master" contact is every 50 cm (marked on the bar). Cutting at this measurement is very easy. However, it is possible, with precision and accuracy, to cut the bars every 10 cm and every 5 cm, so the 2m base bar can be used without any waste. This technology allows for uniform and diffused light. Suitable for both indoor and outdoor use. - Flexible LED Strip Mounting Clip - 13.710.03 - OemPart NUM 13.701.12
In stock
2m bars. They can be cut to the desired length. Please note that the "master" contact is every 50 cm (marked on the bar). Cutting at this measurement is very easy. However, it is possible, with precision and accuracy, to cut the bars every 10 cm and every 5 cm, so the 2m base bar can be used without any waste. This technology allows for uniform and diffused light. Suitable for both indoor and outdoor use. - Hood finishing flexible light strip - 13.710.04. - OemPart NUM 13.701.12
In stock
3m long bars. Square section 10x10 mm with silicone body. They can be cut every 5 cm. Perfect for integration in cabin ceilings for diffuse and uniform lighting. Suitable for both indoor and outdoor use. Accessory line for universal use.Part NUM 13.704.12
In stock
3m long bars. Square section 10x10 mm with silicone body. They can be cut every 5 cm. Perfect for integration in cabin ceilings for diffuse and uniform lighting. Suitable for both indoor and outdoor use. Accessory line for universal use. - Flexible LED Light Bar Neon 24V White - 13.704.24 - OemPart NUM 13.704.12
In stock
3m long bars. Square section 10x10 mm with silicone body. They can be cut every 5 cm. Perfect for integration in cabin ceilings for diffuse and uniform lighting. Suitable for both indoor and outdoor use. Accessory line for universal use. - Hood linear cable outlet - 13.705.04 - OemPart NUM 13.704.12
In stock
3m long bars. Square section 10x10 mm with silicone body. They can be cut every 5 cm. Perfect for integration in cabin ceilings for diffuse and uniform lighting. Suitable for both indoor and outdoor use. Accessory line for universal use. - Blind exit hood - 13.705.05. - OemPart NUM 13.704.12
In stock
Body in ABS, opaline lens.Part NUM 13.831.20
In stock
Body in ABS, opaline lens. - Sun 10 LED white ceiling light - 13.831.22 - OemPart NUM 13.831.20
In stock
Body in ABS, satin polycarbonate lens.Part NUM 13.833.11
In stock
Body in ABS, satin polycarbonate lens. - ABS Saturn LED chrome flush mount ceiling light - 13.833.12 - BatsystemPart NUM 13.833.11
In stock
Self-adhesive, waterproof, equipped with a terminal microconnector that allows them to be connected in series and with a connecting cable with microconnector. - Setting strip of 9 white LEDs - 13.834.01 - OemPart NUM 13.834.01
In stock
Self-adhesive, waterproof, equipped with a terminal microconnector that allows them to be connected in series and with a connecting cable with microconnector. - 12 blue LED setting strip - 13.834.03 - OemPart NUM 13.834.01
In stock
360° rotating light bars. Anodized aluminum casing with embedded SMD LEDs protected by frosted plexiglass. The system is equipped with various types of supports that make it very versatile. They can be manufactured in any length.Part NUM 13.839.01
In stock
In ABSPart NUM 13.868.00